Merge branch 'master' into feat/issue-643-request-preview-initiate

Addresses both blockers from the PR #902 review (review 589) for issue #643.

B1 — an allocator-created assignment could be orphaned and reported as no
mutation.

apply_request re-previews, then re-runs the allocator with apply=True. The CAS
fingerprint hashes only {kind, number} plus exclusions, so a competing lease
taken on the requested unit inside the window leaves the fingerprint identical:
the pin passes, the selection loop skips the now-claimed unit and commits an
assignment on the *next* one, and _selection_matches then fails on egress. The
old code returned mutation_performed False with that lease still committed and
owned by a synthetic session nothing heartbeats. The window contains a second
full load_queue_snapshot(), so it is seconds wide, and foreign sessions acting
on this repo concurrently are an observed condition.

The egress mismatch now releases the assignment the allocator created before
refusing. When the release succeeds the refusal reports mutation_performed
False and a compensation record; when it fails the response carries
mutation_performed True, an explicit orphaned_assignment, and a
gitea_release_workflow_lease reclaim action, because claiming nothing changed
while a lease is live is the defect rather than a report of it.

The same state was reachable through _run_allocator's bare except Exception:
allocate_next_work only catches InvalidWorkKindError, LeaseRequiredError and
ControlPlaneError, so anything raised after assign_and_lease committed arrived
as "no result" with a durable lease. A None result on the apply path now sweeps
and releases whatever this flow's session owns. That sweep is only possible
because of the B2 fix below — the session id is now stable across the flow, so
the lease is findable.

B2 — the "read-only" preview wrote to the control-plane DB.

allocate_next_work called db.upsert_session and db.expire_stale_leases
unconditionally, before the apply branch was consulted, and default_allocator
minted a fresh webui-request-<hex> per call. Every preview therefore appended a
never-reused session row and mutated global lease state while the payload said
dry_run True / mutation_performed False, driven by an operator refreshing a
form. One apply wrote two rows and bound the lease to the second, which is why
B1's orphan had no reclaimable owner.

allocate_next_work gains a keyword-only side_effect_free flag, default False so
every existing caller is byte-for-byte unchanged. Under the flag both writes are
suppressed and expired leases are instead filtered out of the claim map in
memory, which reaches the same selection the sweep would have produced without
persisting anything; a claim whose expiry cannot be parsed is kept, since an
unreadable expiry is not evidence that work is free. side_effect_free with
apply=True fails closed rather than silently reserving. request_service mints
one session id per request flow and threads it through both the dry-run and the
apply, and the dry-run now routes through the side-effect-free path.

Coverage.

test_allocator_drift_on_apply_is_not_read_as_an_assignment asserted the defect —
it built the orphan state and then required mutation_performed to be False, which
a leak satisfies. It now requires the compensating release. Added: release-failure
surfacing a reclaim action, an assignment with no lease id, the post-commit
exception route, and session-id identity across the flow. The two areas the review
named as having zero coverage now have it: default_allocator past its two
fail-closed early returns (side_effect_free routing, session-id pass-through and
minting, scope and fingerprint propagation) and default_claims_source (scoped
read, and an unreadable substrate denying rather than reading as "nothing
claimed"). allocator_service gains side-effect-free tests against a real
temp-file DB plus the expiry-filter unit tests.

Every new guard was mutation-tested by reverting it one at a time: B1
compensation removed → 3 failures; post-commit sweep removed → 1; session id
re-minted per call → 2; side_effect_free ignored → 3; in-memory expiry filter
removed → 1.

Verification: WEBUI_TEST_OFFLINE=1 python -m pytest tests/ -q from this
branches/ worktree gives 23 failed, 5263 passed, 6 skipped, 899 subtests. The
sorted FAILED set is identical to the reviewer's clean-master baseline at
2f4dec83 (23 failed, 5190 passed) — no new, changed, or disappeared failure —
and 21 tests were added over the reviewed head's 5242. Zero conflict markers;
py_compile passes; git diff --check clean.

Refs #643, PR #902

Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
Claude-Session: https://claude.ai/code/session_01V6xFqovhbArPv61j9KCGkL

allocator_service.py

@@ -23,6 +23,7 @@ import json
 import os
 import uuid
 from dataclasses import dataclass, field
+from datetime import datetime, timezone
 from typing import Any, Mapping, Sequence
 
 from control_plane_db import (
@@ -738,6 +739,46 @@ def normalize_exclude_issue_numbers(
     return sorted(out)
 
 
+def _claim_expires_at(claim: Any) -> datetime | None:
+    """Parse a claim's ``expires_at``, or ``None`` when it is absent/malformed."""
+    if not isinstance(claim, Mapping):
+        return None
+    text = str(claim.get("expires_at") or "").strip()
+    if not text:
+        return None
+    if text.endswith("Z"):
+        text = text[:-1] + "+00:00"
+    try:
+        parsed = datetime.fromisoformat(text)
+    except ValueError:
+        return None
+    if parsed.tzinfo is None:
+        parsed = parsed.replace(tzinfo=timezone.utc)
+    return parsed.astimezone(timezone.utc)
+
+
+def _drop_expired_claims(
+    claims: Mapping[tuple[str, int], dict[str, Any]],
+    *,
+    now: datetime | None = None,
+) -> dict[tuple[str, int], dict[str, Any]]:
+    """Claims minus those whose lease has already expired (#643).
+
+    The read-only mirror of ``expire_stale_leases``: the sweep marks such rows
+    ``expired`` so they stop being returned as claims, and this reaches the same
+    view without writing. A claim with no parseable ``expires_at`` is **kept** —
+    an unreadable expiry is not evidence that work is free.
+    """
+    moment = now or datetime.now(timezone.utc)
+    kept: dict[tuple[str, int], dict[str, Any]] = {}
+    for key, claim in (claims or {}).items():
+        expires_at = _claim_expires_at(claim)
+        if expires_at is not None and expires_at <= moment:
+            continue
+        kept[key] = claim
+    return kept
+
+
 def candidate_set_fingerprint(
     candidates: Sequence[WorkCandidate],
     *,
@@ -826,12 +867,22 @@ def allocate_next_work(
     exclude_issue_numbers: Sequence[int] | None = None,
     expected_candidate_set_fingerprint: str | None = None,
     allocation_mode: str | None = None,
+    side_effect_free: bool = False,
 ) -> dict[str, Any]:
     """Select and optionally reserve the next work unit via control-plane DB.
 
     *apply=False* (default): dry-run selection only — no lease/assignment.
     *apply=True*: atomic ``assign_and_lease`` for the selected candidate.
 
+    *side_effect_free* (#643): a dry run that writes **nothing** to the
+    control-plane DB. A plain ``apply=False`` still registered a session row and
+    swept stale leases globally, so a caller advertising a read-only preview was
+    mutating on every call. Under this flag both writes are suppressed and stale
+    leases are instead filtered out of the claim map in memory, which yields the
+    same selection the sweep would have produced without persisting anything.
+    Incompatible with *apply* — the combination fails closed rather than
+    silently reserving.
+
     *allocation_mode* (#840): ``cross_role`` (default for controller) inspects
     the complete queue and returns one authoritative selection naming the
     required downstream role/profile/action. ``role_scoped`` keeps prior
@@ -885,7 +936,24 @@ def allocate_next_work(
             "allocation_mode": (allocation_mode or "").strip() or None,
         }
 
+    # A side-effect-free run may never reserve: reserving is a write, and the
+    # flag is the caller's assertion that this call writes nothing (#643).
+    if side_effect_free and apply:
+        return {
+            "success": False,
+            "outcome": OUTCOME_NO_SAFE,
+            "apply": True,
+            "reasons": [
+                "side_effect_free is incompatible with apply=True; an "
+                "assignment is a write (fail closed, #643)"
+            ],
+            "skipped": [],
+            "assignment": None,
+            "substrate": "control_plane_db",
+        }
+
     session_id = (session_id or "").strip() or f"alloc-{uuid.uuid4().hex[:12]}"
+    if not side_effect_free:
         try:
             db.upsert_session(
                 session_id=session_id,
@@ -953,6 +1021,12 @@ def allocate_next_work(
                 "assignment": None,
                 "substrate": "control_plane_db",
             }
+        if side_effect_free:
+            # ``list_active_claims`` filters on status alone, so without the
+            # global sweep an already-expired lease would still read as a live
+            # claim and the preview would report work as taken that is free.
+            # Drop those in memory: same view the sweep produces, no write.
+            claims = _drop_expired_claims(claims)
 
     try:
         exclude_nums = normalize_exclude_issue_numbers(exclude_issue_numbers)

docs/webui-authz-audit.md

@@ -94,6 +94,7 @@ already define, and a regression test asserts each mapping matches.
 | `record_analytics_usage` | operator | gated_write | `runtime.record_analytics_usage` | Yes | No | No | 2 |
 | `system.reload_namespace` | controller | privileged | `runtime.reload_namespace` | Yes | No | No | 2 |
 | `system.restart_namespace` | admin | destructive | `runtime.restart_namespace` | Yes | **Yes** | **Yes** | 2 |
+| `initiate_workflow` | operator | gated_write | `gitea.read` | Yes | No | No | 2 |
 
 **Dual control** means the acting principal may not be the sole authority: a
 second distinct principal must confirm. **Break-glass** means the action is
@@ -112,6 +113,12 @@ by the console — both hand off to a host supervisor, and neither exposes a raw
 process kill. See
 [`sanctioned-restart-controls.md`](sanctioned-restart-controls.md) (#642).
 
+`initiate_workflow` (#643) is operator-class because its outcome is a *claim*,
+not a Gitea verdict. Requesting reviewer or merger work reserves that work
+through the allocator; it does not grant the right to approve or merge, which
+stays with the MCP role profile and its own capability gates. See
+[`webui-requests.md`](webui-requests.md).
+
 ### Authorization decision
 
 `authorize(action_id, principal, for_execution=False)` returns a decision
@@ -126,9 +133,24 @@ record and **denies by default**. The deny reasons are closed and enumerated:
 | `phase_not_active` | Execution requested for an action whose phase is not open. |
 | `allowed_preview_only` | Authorized — preview only, execution still disabled. |
 
-There is no implicit allow branch. Even the allow result reports
-`execution_enabled: false` while the console is in Phase 1, so no caller can
-read an allow as permission to mutate.
+There is no implicit allow branch.
+
+`execution_enabled` on the decision reports whether the action has a live
+execution path at all, and is computed by `execution_wired(action)`. There are
+exactly two ways to be wired:
+
+1. the action's `phase` is at or below `ACTIVE_PHASE`; or
+2. the action declares an `execution_env_flag` **and** that variable is set.
+
+Every action that declares no flag therefore reports `execution_enabled: false`
+while the console is in Phase 1, so no caller can read an allow as permission
+to mutate. The per-action flag exists because raising `ACTIVE_PHASE` would
+enable execution for every action of that phase at once, including ones whose
+execution path is not implemented. One implemented action goes live on its own
+flag instead of dragging its unimplemented phase-mates with it.
+
+`initiate_workflow` is the only action that currently declares a flag
+(`WEBUI_REQUESTS_EXECUTION`), and it stays denied until an operator sets it.
 
 ## Secret redaction
 
@@ -235,13 +257,22 @@ second one. The integration points are already wired and observable:
   instead of adding a parallel check.
 - **`GET /api/console/security-model`** publishes the RBAC matrix, redaction
   policy, and audit policy as JSON for operators and tests.
+- **`POST /api/v1/requests/preview` and `.../apply`** (#643) are the first
+  actions to use this model for a real execution path. Preview always returns a
+  decision and an audited `previewed` record; apply requires `confirm=true`,
+  emits `succeeded` or `denied`, and reserves work only through the allocator.
+  See [`webui-requests.md`](webui-requests.md).
 
-To open Phase 2, a child issue must: raise `ACTIVE_PHASE`, implement the
-confirmation and dual-control flow the matrix already declares, emit a
-`succeeded` or `failed` record alongside the `gitea_audit` mutation record, and
-keep `viewer` unable to reach any of it. Turning on execution without the
-confirmation flow contradicts a declared requirement and is a review failure,
-not a shortcut.
+A Phase 2 action must: use `execution_wired` rather than a private enable flag,
+implement the confirmation and dual-control flow the matrix already declares,
+emit a `succeeded` or `failed` record alongside the `gitea_audit` mutation
+record, and keep `viewer` unable to reach any of it. Turning on execution
+without the confirmation flow contradicts a declared requirement and is a
+review failure, not a shortcut.
+
+Raising `ACTIVE_PHASE` remains the way to open a whole phase at once, and is
+deliberately *not* what #643 did: an action-scoped opt-in cannot enable an
+action whose execution path nobody wrote.
 
 ## Local-dev mode
 
@@ -294,6 +325,7 @@ Until Phase 2 wires it, probe protection rests on network placement alone, as
 | `WEBUI_ROLE_MAP` | unset | JSON subject → role map |
 | `WEBUI_REQUIRE_PROBE_AUTH` | unset | Require auth for non-public probes |
 | `WEBUI_CONSOLE_AUDIT_LOG` | unset | Append-only audit sink path |
+| `WEBUI_REQUESTS_EXECUTION` | unset | Opt in to `initiate_workflow` execution (#643) |
 
 All are read server-side only. None is ever rendered into a page or returned by
 an API.

docs/webui-requests.md

@@ -0,0 +1,160 @@
+# Web console requests: intent preview and workflow initiation (#643)
+
+**Phase 2. Preview is always live and always read-only. Initiation is wired but
+denied until an operator opts in.**
+
+Before this surface, starting role work meant pasting a prompt into a terminal
+and trusting the operator to have checked the allocator first. Nothing enforced
+that check, so two sessions could reach for the same issue and each believe it
+was theirs. This page replaces the paste with a *request*: a desired role, an
+issue or PR, and a stated intent, answered by an authorization decision and —
+on confirmation — an exclusive assignment from the allocator.
+
+| Concern | Module |
+|---------|--------|
+| Request model, preview, initiation | `webui/request_service.py` |
+| Form and preview rendering | `webui/request_views.py` |
+| Authorization | `webui/console_authz.py` (`initiate_workflow`) |
+| Audit | `webui/console_audit.py` |
+| Ownership substrate | `allocator_service.py` + `control_plane_db.py` |
+
+## Surfaces
+
+| Path | Method | Purpose |
+|------|--------|---------|
+| `/requests` | GET | Request form |
+| `/requests` | POST | Render an intent preview. **Never assigns.** |
+| `/api/v1/requests/preview` | POST | Intent preview as JSON |
+| `/api/v1/requests/apply` | POST | Initiate — confirmed, audited, allocator-owned |
+
+The HTML form has no initiate button on purpose. Initiating requires a
+confirmed POST to `/api/v1/requests/apply`, so a stray form submission cannot
+reserve work as a side effect.
+
+## The request
+
+```json
+{
+  "desired_role": "author",
+  "work_kind": "issue",
+  "work_number": 643,
+  "intent_summary": "implement request preview and initiation",
+  "remote": "prgs",
+  "org": "Scaled-Tech-Consulting",
+  "repo": "Gitea-Tools",
+  "expected_head_sha": null
+}
+```
+
+`desired_role` is one of `author`, `reviewer`, `merger`, `reconciler`,
+`controller`. `work_kind` is `issue` or `pr`. `remote`/`org`/`repo` default to
+the first project in the registry when omitted; when neither the request nor
+the registry resolves them, the request is rejected rather than pointed at some
+other repository. `intent_summary` is required — it is what the audit record
+states as the reason — and is truncated to 500 characters.
+
+Parsing rejects rather than corrects. An unknown role, an unknown work kind, a
+non-positive number, or a missing intent each return `400` with a `reason_code`
+and the offending `field`.
+
+## Preview
+
+Five checks, each with its own verdict, reason code, and detail:
+
+| Check | Passes when |
+|-------|-------------|
+| `authorization` | The console principal holds `operator` or above |
+| `capability` | The desired role maps to a declared profile and MCP namespace |
+| `lease_availability` | No active claim holds the work unit |
+| `next_safe_action` | The allocator would independently select this exact work unit |
+| `head_pin` | PR work resolves to a head SHA, and a supplied SHA still matches |
+
+A preview also returns the role's `allowed_actions` and `prohibited_actions`
+(from `allocator_service.ROLE_ACTIONS`), the `required_profile` and
+`required_namespace` the work must run under, and a `correlation_id` that ties
+the preview to its audit record and to any assignment that follows.
+
+Preview is read-only in the strict sense: it calls the allocator with
+`apply=false` and writes nothing but an audit line. An unauthorized principal
+never reaches the allocator or the control-plane DB at all, so a denial cannot
+be used to enumerate the queue.
+
+## Initiation
+
+`POST /api/v1/requests/apply` refuses in this order, and every refusal returns
+before any assignment is attempted:
+
+| Condition | Outcome | Status |
+|-----------|---------|--------|
+| Unparseable request | `invalid_request` | 400 |
+| Not authorized, or execution not wired | `denied` | 403 |
+| `confirm` not set | `denied` / `confirmation_required` | 409 |
+| Work unit already claimed | `blocked` / `duplicate_assignment` | 409 |
+| Allocator would select other work | `wait` / `not_next_safe_work` | 409 |
+| Allocator declines on apply | `blocked` or `wait` | 409 |
+| Evidence unavailable | `wait` / `evidence_unavailable` | 503 |
+| Assigned | `assigned_work` | 201 |
+
+A success returns the assignment plus a `handoff` block naming the profile, the
+namespace, and the actions that stay forbidden — enough for the operator to
+continue in the right MCP namespace without guessing.
+
+### Why apply runs the allocator twice
+
+The allocator is the only source of exclusive ownership (#600 / #613), and it
+selects work; it does not take orders. So `apply` runs a dry-run first and
+proceeds only when the allocator would independently pick the requested work
+unit. If it would not, the request reports `wait` and mutates nothing.
+
+A request is therefore a *confirmation* of the allocator's decision, never an
+override of it. The apply call carries the dry-run's
+`candidate_set_fingerprint` as a CAS pin (#776), so a queue that changed
+between the two calls fails closed rather than assigning against a stale view.
+The result is checked again on the way out: an assignment naming a different
+work unit is not read as success.
+
+### Fail-closed defaults
+
+- An unreadable control-plane DB denies. It is never treated as "nothing holds
+  this work unit".
+- An incomplete queue inventory denies (#758). Ranking a partial candidate set
+  can select the wrong work.
+- An allocator that raises denies.
+- PR work with no resolvable head SHA denies; a supplied SHA that no longer
+  matches denies with `head_moved`.
+
+## Enabling initiation
+
+Execution is wired off. Set `WEBUI_REQUESTS_EXECUTION=1` to enable it for the
+`initiate_workflow` action only — see
+[`webui-authz-audit.md`](webui-authz-audit.md) for why this is an
+action-scoped flag rather than a phase bump. With the variable unset, `apply`
+returns `403` with `reason_code: unauthorized` no matter who asks.
+
+Enabling execution does **not** enable approvals or merges. Those are phase 3
+console actions and remain forbidden in every path here; the console reserves
+work and hands off, and the MCP role profile enforces what that role may then
+do.
+
+## Audit
+
+Every preview and every apply emits a console audit record (schema in
+[`webui-authz-audit.md`](webui-authz-audit.md)):
+
+| Event | `result` |
+|-------|----------|
+| Preview | `previewed` |
+| Refusal at any stage | `denied` |
+| Assignment created | `succeeded` |
+
+`correlation.request_id` carries the request's `correlation_id`, and a
+successful record's `metadata` carries `assignment_id` and `lease_id`, so an
+assignment can be traced back to the intent that produced it. The operator's
+`intent_summary` travels in `metadata` and passes through the standard
+redaction pass before persistence like every other field.
+
+## Non-goals
+
+- No browser-initiated approve or merge, in this phase or any other.
+- No bypass of allocator exclusive ownership; no self-selection of work.
+- No auto-start from raw monitoring incidents (#612 stays downstream).

tests/test_allocator_service.py

@@ -7,6 +7,7 @@ import tempfile
 import threading
 import unittest
 from concurrent.futures import ThreadPoolExecutor, as_completed
+from datetime import datetime, timezone
 
 from allocator_service import (
     OUTCOME_ASSIGNED,
@@ -15,6 +16,7 @@ from allocator_service import (
     OUTCOME_PREVIEW,
     OUTCOME_WAIT,
     WorkCandidate,
+    _drop_expired_claims,
     allocate_next_work,
     candidate_from_dict,
     classify_skip,
@@ -362,5 +364,161 @@ class AllocatorServiceTest(unittest.TestCase):
         self.assertIn("unavailable", res["reasons"][0].lower())
 
 
+class SideEffectFreeAllocationTest(unittest.TestCase):
+    """``side_effect_free`` dry runs write nothing to the control plane (#643).
+
+    A plain ``apply=False`` still called ``upsert_session`` and
+    ``expire_stale_leases`` before the apply branch was consulted, so a caller
+    advertising a read-only preview mutated on every call — one unreferenced
+    session row per preview, plus a global lease sweep.
+    """
+
+    def setUp(self) -> None:
+        self._tmp = tempfile.TemporaryDirectory()
+        self.db = ControlPlaneDB(os.path.join(self._tmp.name, "cp.sqlite3"))
+
+    def tearDown(self) -> None:
+        self._tmp.cleanup()
+
+    def _alloc(self, **kwargs):
+        defaults = dict(
+            db=self.db,
+            session_id="s-preview",
+            role="author",
+            remote="prgs",
+            org="org",
+            repo="repo",
+            candidates=[
+                WorkCandidate(kind="issue", number=643, labels=("status:ready",))
+            ],
+            apply=False,
+            profile_name="prgs-author",
+            username="jcwalker3",
+        )
+        defaults.update(kwargs)
+        return allocate_next_work(**defaults)
+
+    def _session_ids(self) -> set[str]:
+        return {str(r.get("session_id")) for r in self.db.list_sessions()}
+
+    def test_side_effect_free_preview_writes_no_session_row(self):
+        before = self._session_ids()
+        result = self._alloc(side_effect_free=True)
+        self.assertEqual(result["outcome"], OUTCOME_PREVIEW)
+        self.assertEqual(self._session_ids(), before)
+        self.assertNotIn("s-preview", self._session_ids())
+
+    def test_plain_dry_run_still_registers_a_session(self):
+        # The default is unchanged for every existing caller.
+        self._alloc()
+        self.assertIn("s-preview", self._session_ids())
+
+    def test_repeated_previews_do_not_accumulate_rows(self):
+        for index in range(5):
+            self._alloc(side_effect_free=True, session_id=f"s-{index}")
+        self.assertEqual(self._session_ids(), set())
+
+    def test_side_effect_free_does_not_sweep_stale_leases(self):
+        self.db.upsert_session(session_id="owner", role="author", pid=1)
+        assigned = self.db.assign_and_lease(
+            session_id="owner",
+            role="author",
+            remote="prgs",
+            org="org",
+            repo="repo",
+            kind="issue",
+            number=999,
+            lease_ttl_seconds=-60,  # already expired
+        )
+        self.assertEqual(assigned.outcome, "assigned")
+
+        self._alloc(side_effect_free=True)
+
+        # The expired row is still 'active' in the DB: nothing swept it.
+        statuses = {
+            r["lease_id"]: r["status"]
+            for r in self.db.list_leases(
+                remote="prgs", org="org", repo="repo",
+                statuses=("active", "expired"),
+            )
+        }
+        self.assertEqual(statuses.get(assigned.lease_id), "active")
+
+    def test_expired_claims_are_filtered_in_memory_so_work_stays_selectable(self):
+        """The read-only mirror of the sweep: expired claims must not block."""
+        self.db.upsert_session(session_id="owner", role="author", pid=1)
+        self.db.assign_and_lease(
+            session_id="owner",
+            role="author",
+            remote="prgs",
+            org="org",
+            repo="repo",
+            kind="issue",
+            number=643,
+            lease_ttl_seconds=-60,  # expired: must not withhold #643
+        )
+        result = self._alloc(side_effect_free=True)
+        self.assertEqual(result["outcome"], OUTCOME_PREVIEW)
+        self.assertEqual(result["selected"]["number"], 643)
+
+    def test_a_live_claim_still_withholds_the_work(self):
+        self.db.upsert_session(session_id="owner", role="author", pid=1)
+        self.db.assign_and_lease(
+            session_id="owner",
+            role="author",
+            remote="prgs",
+            org="org",
+            repo="repo",
+            kind="issue",
+            number=643,
+            lease_ttl_seconds=3600,
+        )
+        result = self._alloc(side_effect_free=True)
+        self.assertNotEqual(result["outcome"], OUTCOME_ASSIGNED)
+        self.assertNotEqual((result.get("selected") or {}).get("number"), 643)
+
+    def test_side_effect_free_with_apply_fails_closed(self):
+        result = self._alloc(side_effect_free=True, apply=True)
+        self.assertFalse(result["success"])
+        self.assertEqual(result["outcome"], OUTCOME_NO_SAFE)
+        self.assertIsNone(result["assignment"])
+        self.assertIn("incompatible with apply", result["reasons"][0])
+        # And it reserved nothing.
+        self.assertEqual(
+            self.db.list_leases(remote="prgs", org="org", repo="repo"), []
+        )
+
+
+class DropExpiredClaimsTest(unittest.TestCase):
+    """The in-memory expiry filter behind side-effect-free previews (#643)."""
+
+    def test_unparseable_expiry_is_kept_rather_than_assumed_free(self):
+        claims = {
+            ("issue", 1): {"lease_id": "l1", "expires_at": "not-a-date"},
+            ("issue", 2): {"lease_id": "l2"},
+            ("issue", 3): {"lease_id": "l3", "expires_at": None},
+        }
+        self.assertEqual(_drop_expired_claims(claims), claims)
+
+    def test_expired_dropped_and_future_kept(self):
+        now = datetime(2026, 7, 25, 12, 0, tzinfo=timezone.utc)
+        claims = {
+            ("issue", 1): {"expires_at": "2026-07-25T11:59:59+00:00"},
+            ("issue", 2): {"expires_at": "2026-07-25T12:00:01+00:00"},
+            ("issue", 3): {"expires_at": "2026-07-25T12:00:00+00:00"},  # boundary
+        }
+        kept = _drop_expired_claims(claims, now=now)
+        self.assertEqual(set(kept), {("issue", 2)})
+
+    def test_naive_and_zulu_timestamps_are_treated_as_utc(self):
+        now = datetime(2026, 7, 25, 12, 0, tzinfo=timezone.utc)
+        claims = {
+            ("issue", 1): {"expires_at": "2026-07-25T11:00:00"},  # naive, past
+            ("issue", 2): {"expires_at": "2026-07-25T13:00:00Z"},  # zulu, future
+        }
+        kept = _drop_expired_claims(claims, now=now)
+        self.assertEqual(set(kept), {("issue", 2)})
+
+
 if __name__ == "__main__":
     unittest.main()

webui/app.py

@@ -72,6 +72,8 @@ from webui.system_health import (
     snapshot_to_dict as system_health_to_dict,
 )
 from webui.system_health_views import render_system_health_page
+from webui import request_service
+from webui.request_views import render_requests_page
 
 _READ_ONLY_METHODS = frozenset({"GET", "HEAD", "OPTIONS"})
 _AUDIT_MUTATION_PATHS = frozenset({"/audit", "/api/audit"})
@@ -739,6 +741,109 @@ async def api_v1_analytics_ingest(request: Request) -> JSONResponse:
     )
 
 
+def _default_request_scope() -> dict[str, str]:
+    """Resolve remote/org/repo from the project registry for request forms.
+
+    Returns an empty mapping when the registry cannot be read, which makes
+    ``parse_request`` reject a request that did not name its own scope rather
+    than letting it default to some other repository.
+    """
+    from webui.queue_loader import _host_from_url  # host normalisation helper
+
+    registry, error = _load_project_registry()
+    if error is not None or not registry.projects:
+        return {}
+    project = registry.projects[0]
+    host = _host_from_url(project.remote_host)
+    return {
+        "remote": _derive_remote(host),
+        "org": project.gitea_owner or "",
+        "repo": project.repo_name or "",
+    }
+
+
+async def _request_payload(request: Request) -> dict[str, object]:
+    """Read a request body as JSON or form-encoded. Never raises."""
+    content_type = (request.headers.get("content-type") or "").lower()
+    if "application/json" in content_type:
+        try:
+            body = await request.json()
+        except Exception:
+            return {}
+        return dict(body) if isinstance(body, dict) else {}
+    try:
+        form = await request.form()
+    except Exception:
+        return {}
+    return {key: form[key] for key in form}
+
+
+async def requests_page(request: Request) -> HTMLResponse:
+    """Operator request form and intent preview (#643).
+
+    POST here only ever *previews*. Initiation is a separate confirmed call to
+    ``/api/v1/requests/apply`` so that submitting this form cannot reserve
+    work as a side effect.
+    """
+    submitted: dict[str, object] = {}
+    preview = None
+    error = None
+    if request.method == "POST":
+        submitted = await _request_payload(request)
+        work_request, error = request_service.parse_request(
+            submitted, default_scope=_default_request_scope()
+        )
+        if work_request is not None:
+            preview = request_service.preview_request(
+                work_request,
+                principal=resolve_principal(headers=dict(request.headers)),
+            )
+    return HTMLResponse(
+        render_requests_page(
+            preview=preview, error=error, submitted=submitted
+        )
+    )
+
+
+async def api_v1_request_preview(request: Request) -> JSONResponse:
+    """Dry-run authorization and intent preview for a work request (#643)."""
+    payload = await _request_payload(request)
+    work_request, error = request_service.parse_request(
+        payload, default_scope=_default_request_scope()
+    )
+    if work_request is None:
+        return JSONResponse(error.to_dict(), status_code=400)
+    preview = request_service.preview_request(
+        work_request,
+        principal=resolve_principal(headers=dict(request.headers)),
+    )
+    return JSONResponse(
+        preview.to_dict(), status_code=200 if preview.authorized else 403
+    )
+
+
+async def api_v1_request_apply(request: Request) -> JSONResponse:
+    """Initiate a previewed work request through the allocator (#643).
+
+    Fail-closed at every step: unauthorized, unconfirmed, not-next-safe, and
+    already-claimed all return without attempting an assignment.
+    """
+    payload = await _request_payload(request)
+    work_request, error = request_service.parse_request(
+        payload, default_scope=_default_request_scope()
+    )
+    if work_request is None:
+        return JSONResponse(error.to_dict(), status_code=400)
+    confirm = _truthy_flag(str(payload.get("confirm") or ""))
+    result = request_service.apply_request(
+        work_request,
+        principal=resolve_principal(headers=dict(request.headers)),
+        confirm=confirm,
+    )
+    status = int(result.pop("status_code", 403))
+    return JSONResponse(result, status_code=status)
+
+
 async def method_not_allowed(request: Request, _exc: Exception) -> Response:
     path = request.url.path
     if path in _AUDIT_MUTATION_PATHS and request.method == "POST":
@@ -806,6 +911,17 @@ def create_app(*, bind_host: str | None = None) -> Starlette:
                 api_action_attempt,
                 methods=["POST"],
             ),
+            Route("/requests", requests_page, methods=["GET", "POST"]),
+            Route(
+                "/api/v1/requests/preview",
+                api_v1_request_preview,
+                methods=["POST"],
+            ),
+            Route(
+                "/api/v1/requests/apply",
+                api_v1_request_apply,
+                methods=["POST"],
+            ),
             Route("/api/leases", api_leases, methods=["GET"]),
             Route("/api/v1/inventory", api_inventory, methods=["GET"]),
             Route(

webui/console_authz.py

@@ -115,6 +115,12 @@ class ConsoleAction:
     break_glass: bool
     phase: int
     summary: str
+    # Opt-in switch for an action whose execution path is genuinely wired
+    # ahead of its phase becoming globally active (#643). Naming a variable
+    # here enables nothing on its own: the variable must also be set in the
+    # environment. An action that leaves this ``None`` can only execute once
+    # ACTIVE_PHASE reaches its phase, exactly as before.
+    execution_env_flag: str | None = None
 
     @property
     def mcp_permission(self) -> str:
@@ -277,6 +283,27 @@ _ACTION_SPECS: tuple[ConsoleAction, ...] = (
         phase=2,
         summary="Restart one MCP namespace via the host supervisor.",
     ),
+    # #643: submit a work request — desired role, issue/PR, intent — and let
+    # the allocator reserve it. This is the one Phase 2 action whose execution
+    # path is actually implemented (``webui.request_service``), so it carries
+    # the opt-in flag; it stays denied until an operator sets that variable.
+    # Authority is operator-class because the outcome is a claim, not a Gitea
+    # verdict: initiating reviewer or merger *work* does not grant the right
+    # to approve or merge, which stays with the MCP role profile.
+    ConsoleAction(
+        action_id="initiate_workflow",
+        task_key="allocate_next_work",
+        action_class=CLASS_WRITE,
+        minimum_role=OPERATOR,
+        requires_confirmation=True,
+        dual_control=False,
+        break_glass=False,
+        phase=2,
+        summary=(
+            "Preview and initiate allocator-owned workflow work for a role."
+        ),
+        execution_env_flag="WEBUI_REQUESTS_EXECUTION",
+    ),
 )
 
 ACTIONS: dict[str, ConsoleAction] = {a.action_id: a for a in _ACTION_SPECS}
@@ -430,6 +457,33 @@ ALLOW_PREVIEW = "allowed_preview_only"
 # gated on this model landing; nothing here enables it.
 ACTIVE_PHASE = 1
 
+_TRUTHY = frozenset({"1", "true", "yes", "on"})
+
+
+def execution_wired(
+    action: ConsoleAction | None, env: dict[str, str] | None = None
+) -> bool:
+    """Whether *action* has a live execution path right now.
+
+    Two ways to be wired, and only two. The action's phase is active, or the
+    action declares an opt-in environment variable *and* that variable is set.
+    Everything else — including every action that never declares a flag — is
+    unwired, so the default across the registry stays deny.
+
+    Bumping ``ACTIVE_PHASE`` would enable execution for every action of that
+    phase at once. The per-action flag exists so a single implemented action
+    can go live without dragging its unimplemented phase-mates with it.
+    """
+    if action is None:
+        return False
+    if action.phase <= ACTIVE_PHASE:
+        return True
+    flag = (action.execution_env_flag or "").strip()
+    if not flag:
+        return False
+    source = env if env is not None else os.environ
+    return (source.get(flag) or "").strip().lower() in _TRUTHY
+
 
 @dataclass(frozen=True)
 class AuthorizationDecision:
@@ -469,16 +523,19 @@ def authorize(
     principal: Principal | None = None,
     *,
     for_execution: bool = False,
+    env: dict[str, str] | None = None,
 ) -> AuthorizationDecision:
     """Decide whether *principal* may invoke *action_id*. Deny by default.
 
     ``for_execution`` distinguishes a read-only preview from a real invocation.
-    Even an allowed decision reports ``execution_enabled=False`` while the
-    console is in Phase 1, so no caller can read an allow as permission to
-    mutate.
+    ``execution_enabled`` reports whether the action has a live execution path
+    at all (:func:`execution_wired`) — for every action without an explicit
+    opt-in flag that stays ``False`` while the console is in Phase 1, so no
+    caller can read an allow as permission to mutate.
     """
     who = principal if principal is not None else ANONYMOUS
     action = get_action(action_id)
+    wired = execution_wired(action, env)
 
     if action is None:
         return AuthorizationDecision(
@@ -497,7 +554,7 @@ def authorize(
         "requires_confirmation": action.requires_confirmation,
         "dual_control": action.dual_control,
         "break_glass": action.break_glass,
-        "execution_enabled": False,
+        "execution_enabled": wired,
     }
 
     if not who.authenticated:
@@ -530,13 +587,19 @@ def authorize(
             **base,
         )
 
-    if for_execution and action.phase > ACTIVE_PHASE:
+    if for_execution and not wired:
         return AuthorizationDecision(
             allowed=False,
             reason_code=DENY_PHASE_NOT_ACTIVE,
             detail=(
                 f"Action {action_id!r} belongs to phase {action.phase}; the "
-                f"console is in phase {ACTIVE_PHASE}. Execution is not wired."
+                f"console is in phase {ACTIVE_PHASE}"
+                + (
+                    f" and {action.execution_env_flag} is not set"
+                    if action.execution_env_flag
+                    else ""
+                )
+                + ". Execution is not wired."
             ),
             **base,
         )
@@ -545,8 +608,8 @@ def authorize(
         allowed=True,
         reason_code=ALLOW_PREVIEW,
         detail=(
-            "Principal holds the required role. Preview only — execution "
-            "remains disabled until the Phase 2 action framework ships."
+            "Principal holds the required role. Execution proceeds only for an "
+            "action with a wired execution path; everything else is preview."
         ),
         **base,
     )

webui/nav.py

@@ -45,6 +45,7 @@ NAV_GROUPS: tuple[NavGroup, ...] = (
         NavItem("/queue", "Queue"),
         NavItem("/leases", "Leases"),
         NavItem("/actions", "Actions"),
+        NavItem("/requests", "Requests"),
     )),
     NavGroup("Runtime/Sessions", (
         NavItem("/runtime", "Runtime health"),

webui/request_views.py

@@ -0,0 +1,164 @@
+"""HTML views for the operator request surface (#643).
+
+The form is deliberately a *preview* form. It has no initiate button, because
+initiating requires a confirmed POST to ``/api/v1/requests/apply`` and a stray
+form submission must not be able to produce one by accident.
+
+Nothing rendered here is trusted input: every interpolated value is escaped,
+and the page renders only values the service already produced rather than
+echoing a raw request body back.
+"""
+
+from __future__ import annotations
+
+import html
+import json
+from typing import Any
+
+from webui.layout import render_page
+from webui.request_service import (
+    REQUESTABLE_ROLES,
+    WORK_KINDS,
+    RequestError,
+    RequestPreview,
+)
+
+REQUESTS_PATH = "/requests"
+PREVIEW_API_PATH = "/api/v1/requests/preview"
+APPLY_API_PATH = "/api/v1/requests/apply"
+
+
+def _escape(text: Any) -> str:
+    return html.escape(str(text if text is not None else ""), quote=True)
+
+
+REQUEST_PAGE_STYLES = """
+<style>
+  .request-form { display: grid; gap: 0.75rem; max-width: 44rem; }
+  .request-form label { display: grid; gap: 0.25rem; font-size: 0.9rem; }
+  .request-check { margin: 0.35rem 0; }
+  .request-check .verdict-ok { color: var(--accent); }
+  .request-check .verdict-fail { color: #d14; }
+  .request-prohibited code { margin-right: 0.4rem; }
+</style>
+"""
+
+
+def _options(values: tuple[str, ...], selected: Any) -> str:
+    return "".join(
+        f"<option value='{_escape(value)}'"
+        + (" selected" if selected == value else "")
+        + f">{_escape(value)}</option>"
+        for value in values
+    )
+
+
+def _form(values: dict[str, Any] | None = None) -> str:
+    current = dict(values or {})
+    number = current.get("work_number")
+    return (
+        f"<form class='request-form' method='post' action='{REQUESTS_PATH}'>"
+        "<label>Desired role<select name='desired_role'>"
+        f"{_options(REQUESTABLE_ROLES, current.get('desired_role'))}"
+        "</select></label>"
+        "<label>Work kind<select name='work_kind'>"
+        f"{_options(WORK_KINDS, current.get('work_kind'))}"
+        "</select></label>"
+        "<label>Issue or PR number"
+        "<input type='number' name='work_number' min='1' required "
+        f"value='{_escape(number) if number else ''}'></label>"
+        "<label>Intent summary"
+        "<input type='text' name='intent_summary' maxlength='500' required "
+        f"value='{_escape(current.get('intent_summary'))}'></label>"
+        "<label>Expected head SHA <span class='muted'>(PR work only)</span>"
+        "<input type='text' name='expected_head_sha' "
+        f"value='{_escape(current.get('expected_head_sha'))}'></label>"
+        "<button type='submit' class='copy-btn'>Preview request</button>"
+        "<p class='muted meta'>Preview is read-only and creates no assignment. "
+        f"Initiating requires a confirmed POST to <code>{APPLY_API_PATH}</code>."
+        "</p>"
+        "</form>"
+    )
+
+
+def _checks_block(preview: RequestPreview) -> str:
+    rows = []
+    for check in preview.checks:
+        verdict = "PASS" if check.ok else "FAIL"
+        css = "verdict-ok" if check.ok else "verdict-fail"
+        rows.append(
+            "<li class='request-check'>"
+            f"<span class='{css}'><strong>{verdict}</strong></span> "
+            f"<code>{_escape(check.name)}</code> — {_escape(check.detail)} "
+            f"<span class='muted meta'>({_escape(check.reason_code)})</span>"
+            "</li>"
+        )
+    return "<ul>" + "".join(rows) + "</ul>"
+
+
+def _preview_block(preview: RequestPreview) -> str:
+    verdict = "AUTHORIZED" if preview.authorized else "DENIED"
+    prohibited = "".join(
+        f"<code>{_escape(action)}</code>" for action in preview.prohibited_actions
+    )
+    request = preview.request
+    evidence = json.dumps(preview.allocator_evidence, indent=2, default=str)
+    return (
+        "<h3>Intent preview</h3>"
+        f"<p><strong>{verdict}</strong> — {_escape(preview.detail)}</p>"
+        "<p class='meta'>"
+        f"Role <code>{_escape(request.desired_role)}</code> · "
+        f"{_escape(request.work_kind)} <code>{_escape(request.display_ref)}</code>"
+        f" · profile <code>{_escape(preview.required_profile)}</code> · "
+        f"namespace <code>{_escape(preview.required_namespace)}</code> · "
+        f"permission <code>{_escape(preview.required_permission)}</code>"
+        "</p>"
+        f"<p>Intent: {_escape(request.intent_summary)}</p>"
+        f"{_checks_block(preview)}"
+        f"<p><strong>Next safe action:</strong> "
+        f"{_escape(preview.next_safe_action)}</p>"
+        "<p class='request-prohibited'><strong>Prohibited for this role:</strong> "
+        + (prohibited or "<span class='muted'>none declared</span>")
+        + "</p>"
+        "<p class='muted meta'>Correlation id "
+        f"<code>{_escape(preview.correlation_id)}</code></p>"
+        "<details><summary>Allocator evidence</summary>"
+        f"<pre class='prompt-text'>{_escape(evidence)}</pre>"
+        "</details>"
+    )
+
+
+def _error_block(error: RequestError) -> str:
+    field = (
+        f"<p class='meta'>Field: <code>{_escape(error.field_name)}</code></p>"
+        if error.field_name
+        else ""
+    )
+    return (
+        "<h3>Request rejected</h3>"
+        f"<p><strong>{_escape(error.reason_code)}</strong> — "
+        f"{_escape(error.detail)}</p>{field}"
+    )
+
+
+def render_requests_page(
+    *,
+    preview: RequestPreview | None = None,
+    error: RequestError | None = None,
+    submitted: dict[str, Any] | None = None,
+) -> str:
+    """Render the request form, plus a preview or rejection when one exists."""
+    body = (
+        "<h2>Requests</h2>"
+        "<p>Submit a work request — desired role, issue or PR, and intent — "
+        "and see whether it would be authorized before anything is reserved. "
+        "Initiation goes through the allocator (#600/#613); this console never "
+        "self-selects work, never approves, and never merges.</p>"
+        + _form(submitted)
+        + (_error_block(error) if error is not None else "")
+        + (_preview_block(preview) if preview is not None else "")
+        + f"<p class='meta'><a href='{PREVIEW_API_PATH}'>Preview API</a> · "
+        "<a href='/api/console/security-model'>RBAC model</a></p>"
+        + REQUEST_PAGE_STYLES
+    )
+    return render_page(title="Requests", body_html=body)

webui/traffic_loader.py

@@ -201,6 +201,16 @@ def _candidates_from_queue_snapshot(q_snap: QueueSnapshot) -> list[WorkCandidate
     return candidates
 
 
+def candidates_from_queue_snapshot(q_snap: QueueSnapshot) -> list[WorkCandidate]:
+    """Public alias for :func:`_candidates_from_queue_snapshot` (#643).
+
+    The request-initiation service ranks the same candidate set this view
+    renders, so both must agree on how a queue row becomes a candidate. One
+    construction, two callers — not two that can drift apart.
+    """
+    return _candidates_from_queue_snapshot(q_snap)
+
+
 def _claim_lease_records(inventory: dict[str, Any] | None) -> list[dict[str, Any]]:
     """Normalize ``build_claim_inventory`` entries into lease records.